Double-entry centrifugal pumps D,1D

Pumps and units are designed for pumping water and other liquids. Water supply systems, heat supply, drainage, field irrigation, energy, mining and processing enterprises. Kit options: pump, pump on a foundation plate without a motor, unit (pump on a plate with a motor). The cost varies from $ 1,000 per pump.

Mobile pumping stations

The mobile pumping station is designed to supply water from open reservoirs through an open or closed irrigation network to irrigated areas. The station is a unit consisting of a frame on which the engine, pump, suction and pressure pipelines, a suction pipeline lifting mechanism, a pump water filling system, a fuel tank, electrical equipment with an engine protection system are mounted. The operating modes (supply, pressure) are adjusted by opening or closing the valve by a certain value, which is controlled by the pressure gauge.

Double-entry pumps NDF and DF

These are single-stage horizontal fecal pumps with double-sided inlet. The pumps have a closed impeller with double-sided inlet and are screwed onto the shaft with a thread. The sealing rings protect the pump housing and cover from wear. They also reduce the leakage of the pumped medium from the pump pressure cavity into the suction cavity. Pumped liquid: temperature up to +85C, density not more than 1050kg3/m, maximum mass concentration of solids not more than 2%, maximum size of solids not more than 5mm, microhardness not more than 6.5 (650) GPa (kg3/h), hydrogen index 6.0-.

KFB console pumps

KFS pumping units are fecal centrifugal pumps of horizontal design. These are single-stage console pumps with a one-way inlet impeller. KFS pumps are fecal pumps and are intended for pumping fecal water and sewage waste. The pump has a stuffing box (end on order). KFS pumps are designed for pumping wastewater and fecal liquids with a pH of 6 to 8.5, a density of up to 1050 kg/m3, a temperature of up to +85 C, a maximum mass concentration of solid particles of no more than 2% and a size of solid particles of no more than 5 mm.

Axial pumps

Axial pumps of type "O" - in the plant's product range are represented by recirculators, which are designed to supply large volumes of clean or slightly contaminated liquids with low pressures with a temperature of 85 ° C, for example, for recirculation of first saturation juice in sugar factories. Due to the reversibility effect of axial pumps, recirculators can be used as a turbine in a mini-hydroelectric power plant to generate electricity in an environmentally friendly way, using the energy of moving water (plain and mountain rivers, water supply and sewage networks with excess pressure).

Rotary pumps

Rotary pumps of the RN type are designed for feeding mass, affination mass, molasses, semi-dry defecate without abrasive impurities, as well as other media with a kinematic viscosity of no more than 75 cm/sec2 at sugar factories. The temperature of the pumped media is no more than +80°C. The pump and unit are manufactured in the UHL climatic version for operation in premises of accommodation category 4 according to GOST 15150. Delivery options: pump, unit (pump on a frame with an engine and gearbox).

Pumps 300d70 200d90

The horizontal centrifugal single-stage pump has a two-way liquid supply and is designed for pumping water and other liquids with similar physical and chemical parameters. The viscosity of the transported liquid should not exceed 36*10-6 m2/s, and its maximum temperature should not exceed 85 °C. The mass fraction of solid particles in the working liquid should not exceed 0.05% of the total volume. The pumps are used at rural, industrial and urban stations, and can also be used for pumping petroleum products.

BDR reagent dosing unit

The BDR reagent dosing unit is used for the preparation and dosing of demulsifiers and corrosion inhibitors into the pipeline of the oil transport and preparation system. The unit is used at oil and gas production enterprises, municipal services, etc. The box doors are made in an anti-vandal design.

Steam piston pumps

Steam piston pumps are designed to operate on both saturated and superheated steam with temperatures up to 573 K (up to 300 °C) in stationary and transport conditions for pumping oil and oil products, liquefied hydrocarbon gases, fresh and sea water and other liquids similar to those specified in density, viscosity and chemical activity with temperatures up to 673 K (up to 400 °C) depending on the pump design.

Pumps and units
triple plunger crank

Triple-plunger crank pumps PT and T are designed for pumping neutral and aggressive liquids, neutral to the materials of the hydraulic part with a kinematic viscosity of not more than 800 mm2/s (8 C) at a temperature, depending on the version, from 233 K from 243 K to 400 to 400 to 400 to 400 to 400 to 400 to 400 to 40°C. The content of solid non-abrasive particles in the pumped liquid is allowed to be no more than 0.2% by mass, the sizes allowed are no more than 0.2 mm. Pumps and units are used in industries that require high pressures, including explosive and fire hazardous ones (for example, hydraulic cleaning of technological equipment). Also used as feed pumps for mobile steam generating installations.

Pumps and units
dosing plunger

Plunger dosing pumps and units are designed for volumetric pressure dosing of neutral and aggressive liquids, emulsions and suspensions with a kinematic viscosity from 8.5x10-7 to 8x10-2m2/s (from 0.0085 to 8 V 4 to plus 150 °C and more), with a concentration of solid non-abrasive phase not more than 10% by weight with a maximum particle density of up to 2000 kg m3, with a grain size of solid non-abrasive phase not more than 1% of the diameter of the nominal passage of the inlet pipe.

Membrane dosing units

The NDM type membrane dosing unit is designed for controlled delivery of hazardous or aggressive liquids, emulsions and suspensions with a kinematic viscosity from 8.5 1 SG7 to 8.0-10 m2/s (from 0.0085 to 8 cm2/s), with a temperature from 233 to 353 K (from -40 to +80°C), with a concentration of solid non-abrasive phase not exceeding 10% by mass, with a maximum particle density of up to 1400 kg/m3

Electric piston pump units AN type

Electric piston pump units of the AN type are designed for pumping water (except drinking and sea water) and neutral liquids with a kinematic viscosity from 0.008x10-4 to 8x10-4 m2/s and a temperature from 258 K to 353 K (from minus 15 to plus. The units can be supplied in a version for pumping liquids with a temperature of up to 378 K (105 °C), which is specified on request. The maximum volumetric concentration of solid non-abrasive particles in the pumped medium is 0.2%, the maximum particle size is 0.2 mm. The units are used in power supply and water treatment systems of low-power boiler units.

Electric pump unit
centrifugal vertical
ANV 50/50

The vertical centrifugal electric pump unit ANV 50/50 is designed for pumping a mixture of water and oil products from underground drainage tanks with solid inclusions, the maximum volumetric concentration of which does not exceed 1.5%, with a temperature from 258 to 353 K [0.00 32x The units are manufactured in a general industrial version with gland packing, and in a version for explosive and fire-hazardous industries with a face seal.

Manual slide pump NRSH25/5

Manual gate pump NRSH25/5 for pumping water and aqueous solutions.

Manual piston pump, on/off switch 0.8/30

The manual piston pump RPN 0.8/30 is designed for pumping fresh water from wells and tanks containing mechanical impurities up to 0.1 mm in size, the mass concentration of which does not exceed 0.3% and a temperature up to 343 K (70 °C).

Hydrotreating plant type UN, UPG

UN, UPG and UPGD installations are designed for hydrocleaning of sewer and other pipelines with a diameter of 80 to 600 mm, as well as external and internal surfaces of various technological and other equipment, mechanisms, buildings, structures and other objects.
The UPG installation consists of a triple plunger pump, an electric motor and a hose reel mounted on a mobile cart. The installation is supplied with a set of replaceable flushing heads, and at the customer's request, a water gun for cleaning the internal and external surfaces of products.
The UPGD installation, unlike the UPG, is driven by a diesel engine. The installation can be mounted on a car or tractor trailer, and also has a water tank.